Fuses; Bulb Replacement - PEUGEOT E-vivacity Bedienungsanleitung

FUSES

The electrical system is protected by the fuses located
under the storage compartment.
If a fuse often blows this is usually a sign of a short circuit
in the electrical circuit. You are advised to have the
system checked by a registered dealer.
You are advised to switch off the ignition
before changing a fuse and always to replace
it with a fuse of the same rating. If you do not
do so, this may lead to damage in the electrical
circuit or even a fire.
Any electrical appliance represents a potential
danger. Only a suitably qualified repairer can
intervene on your electric scooter.
Replacing a fuse
• Open the saddle.
• Remove the access door (3 screw).
• Checking the condition of the fuses.
Any work involving removal and refitting, for
cleaning or other purpose involving the storage
compartment components, must be done with
the utmost care.
It is important to protect the base of the
storage compartment from any entry of water.
FUSE ALLOCATION
F1
F2
5A
F3
5A
Acceleration potentiometer
F4
Traction battery regulating calculator
15A
Electrical traction calculator
F5
10A
F6
20A
Reproduction or translation, even partial, is forbidden without the written consent of Peugeot Scooters
Headlight bulb
Not used
Starting circuit
12-volt plug
Transponder antenna
Instrument panel
Converter relay
Diagnostic plug
Lighting
Horn
Converter
Battery charge circuit
Indicator bulbs

BULB REPLACEMENT

• Remove the headlight fairing (1).
You are advised to contact a registered
dealer to have this operation carried out.
1
• Remove the rear shield panel (2).
• Remove the 3 screws that secure the front turnsignal
light.
You are advised to contact a registered
dealer to have this operation carried out.
FR
GB
DE
IT
2
ES
NL
GR
SE
PT
FI
DK
13/14