Instruments - PEUGEOT E-vivacity Bedienungsanleitung

INSTRUMENTS

FR
Each time the contact is made, after pressing the starter
button, the headlight turns on and the instrument panel
initialises: A function test of the display unit segments and
lighting of all indicator lights are performed automatically.
GB
1. Main beam control
When the contact is made, after pressing the starter button,
the indicator light turns on for 3 seconds.
DE
2. Direction indicator warning light
When the contact is made, after pressing the starter button,
the indicator light turns on for 3 seconds.
When a flasher bulb has failed the repeater light and the
IT
other flasher light flash more quickly to alert the rider of a
failure.
A buzzer reminds the driver of the direction indicators.
3. Transponder diagnostic warning light
ES
When the contact is made, after pressing the starter button,
the indicator light turns on for 3 seconds followed by a short
time lit, then turns off if there is no incident.
NL
If the indicator light blinks for a short time and then stays lit,
and the instrument panel does not turn on, the diagnostic
function has detected an anomaly with the anti-start system
and the traction system is overridden.
GR
In this case : You are advised to have the vehicle checked by
an authorised dealer.
When the contact is cut, the indicator light blinks for a short
time, which indicates that the anti-start system has locked
SE
the traction system.
The transponder diagnostic indicator light blinks while the
traction battery is being charged.
4. Multi-function display
PT
5. Display control knob
6. Operating mode selection button
FI
DK
6/14 Reproduction or translation, even partial, is forbidden without the written consent of Peugeot Scooters