Normal Operation - Ecom SHL 200-Ex Bedienungsanleitung

9.1

Normal Operation

The portable lamp is mobile lighting equipment.
9.1.1 Function
• Main light - Switching on / Dimming / Switching off
• Main light - Flashing (flashing frequency once per second)
• Secondary light - Switching on / Switching off
The main or secondary light of the portable lamp can only be switched on
if the portable lamp is outside the charging unit.
The undimmed main light and the secondary light light flicker-free.
The main light is switched automatically to the secondary light when:
• the main light is defective.
• the battery capacity is less than 10%.
9.1.2 Switching On / Changing the Function
Switching on:
Press the pushbutton
• The main light is switched on.
The LED display shows the battery capacity for 5 seconds.
Switching
Press pushbutton repeatedly while the LED display is active.
• The secondary light is switched on.
• The main light flashes once per second.
• The LED is switched off.
9.1.3 Switching off
Press the pushbutton:
• if the main light is flashing.
• 5 seconds after the last switching operation.
9.1.4 Dimming mode
Danger due to stroboscopic effect!
Serious injuries are possible!
• Do not use the dimming mode for rotating parts.
• In dimming mode, the portable lamp does not light flicker-free!
• Under certain conditions, the rotation of parts cannot be detected.
The portable lamp must be off.
• Press the pushbutton until reaching the desired dimming level.
• The LED display shows the selected dimming level.
WARNING
Portable Lamp
SHL 200-Ex
Operation
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
35