Transport And Storage; General; Batteries; Handle With Care - Ecom SHL 200-Ex Bedienungsanleitung

Transport and storage

EN
Technical Data
EN
Charging current
EN
EN
EN
EN
EN
EN
Charging time
EN Function
EN
Automatic break
EN
device
EN
EN
EN
Protection class
EN
Enclosure material
EN
Mounting
EN
Connection cables
EN
EN Note
EN
EN
EN
6 Transport and storage
EN
EN
6.1

General

EN
• Transport and store the device only in the original packaging.
• Store the device in a dry place (no condensation) and vibration-free.
• Do not drop the device.
6.2

Batteries

• Do not transport together with other materials!

• Handle with care!

• Store protected from fire, sources of dust, harmful gases and liquids!
• Store in a dry and cool location!
30
Portable Lamp
SHL 200-Ex
at room temperature:
charging process
12 V DC max. 170 mA
24 V DC max. 120 mA
110 V AC max. 90 mA
240 V AC max. 60 mA
approx. 11 h
Charging starts upon inserting the portable lamp into the charging unit -
with voltage display via green LED
In motor vehicle operation, the car battery voltage is monitored. If the voltage
of the car battery drops below 11.7 V and 23.5 V with a 12 V and 24 V battery,
respectively, the charging process of the portable lamp will be interrupted
automatically.
The automatic break device can be deactivated.
II (with protective insulation)
polyamide, impact-resistant, black
wall or table mounting
charging cable 110 ... 240 V AC: approx. 1.8 m long, with Europlug, 2-pin
charging cable 12 ... 30 V DC: approx. 1.8 m long, with free ends, 2-pin
Ex operation
Attention!
The charging units are not suitable for use in hazardous areas!
Charging units must always be mounted in NON-Ex areas!
stand by
power consumption < 1 W