Solving Mirror Conflicts In Raid 1 - Fujitsu Siemens Computers JMicron JMB362 Benutzerhandbuch

Solving mirror conflicts in RAID 1
A mirror conflict occurs when the system becomes unable to determine which hard disk is the
primary hard disk (source drive) and which hard disk is the secondary hard disk (mirror drive). The
RAID BIOS Setup Utility can be used to define which roles the hard disks should perform.
All data on the mirror drive will be deleted!
► Select Solve Mirror Conflict using the arrow keys and press the Enter key.
A results message will be displayed.
► Select Rebuild Mirror Drive to restore the mirror drive (see
hard disk mirror in RAID 1", Page
10600854936, edition 1
16).
BIOS Setup Utility
"Rebuilding a
English - 15