Creating A Raid 0 - Fujitsu Siemens Computers JMicron JMB362 Benutzerhandbuch

BIOS Setup Utility

Creating a RAID 0

Creating a RAID 0 will cause all data on both hard disks to be deleted!
The system must be rebooted after the RAID has been created.
The "Fujitsu Siemens Computers Recovery solution" provides a means of
restoring factory settings for the software, provided that the data backup
has been carried out prior to setting up the RAID.
The data backup/data recovery procedure for your PC is described in
detail in the "Recovery Process" manual.
► Select Create RAID Disk Drive using the arrow keys and press the Enter key.
6 - English 10600854936, edition 1