Deleting A Faulty Raid On An Individual Hard Disk - Fujitsu Siemens Computers JMicron JMB362 Benutzerhandbuch

BIOS Setup Utility

Deleting a faulty RAID on an individual hard disk

It may be necessary to use this function if you wish to incorporate a hard disk into
the system that was part of a different RAID. It is not possible to incorporate a hard
disk into a new RAID when it still contains an old RAID.
All data on the hard disk will be deleted when the RAID is deleted.
The "Fujitsu Siemens Computers Recovery solution" provides a means of
restoring factory settings for the software, provided that the data backup
has been carried out prior to setting up the RAID.
The data backup/data recovery procedure for your PC is described in
detail in the "Recovery Process" manual.
► Select Revert HDD to Non-RAID using the arrow keys and press the Enter key.
► Use the arrow keys to select the desired hard disk from the list of drives and press Enter to confirm.
You will be prompted to confirm the deletion.
► Confirm with the
14 - English
key.
Y
10600854936, edition 1