Key Features - Fujitsu Siemens Computers JMicron JMB362 Benutzerhandbuch

Key features

The JMicron RAID solution for two SATA hard disks uses a JMB362 chip for the RAID controller.
You can easily configure and manage disks and disk arrays using the Windows-based RAID
software. The key features and benefits of JMicron IDE RAID are listed below:
• Supports SATA Generation 1
• Supports hard disks larger than 137 GB (48-bits LBA)
• Supports Ultra DMA mode 6/5/4/3/2/1/0, DMA mode 2/1/0, and PIO mode 4/3/2/1/0
• Supports PCI "Plug and Play" PCI interrupt sharing and coexists with mainboard IDE controller
• Supports IDE bus master operation
• Supports RAID 0, RAID 1 and SPAN (JBOD)
• Supports striping block sizes from 4 Kbyte to 128 Kbyte
• Supports bootable hard disk or disk array
• Windows-based software tool for RAID configuration and management (compatible with BIOS)
• Real-time monitoring of device status, error alarm with popup window and beep
• Supports hot-swap for failed disk drive in RAID 1 disk array
• Supports mirroring for automatic background rebuilds
• Supports ATA SMART function
• Supports Microsoft Windows XP operating systems
• Event log file for easy troubleshooting
• Online help for easy operation of RAID software
10600854936, edition 1
Introduction
English - 3