Deleting Raid Or Span (Jbod) - Fujitsu Siemens Computers JMicron JMB362 Benutzerhandbuch

Deleting RAID or SPAN (JBOD)

It is possible to delete an existing RAID or SPAN. Proceed as follows:
The "Fujitsu Siemens Computers Recovery solution" provides a means of
restoring factory settings for the software, provided that the data backup
has been carried out prior to setting up the RAID.
The data backup/data recovery procedure for your PC is described in
detail in the "Recovery Process" manual.
All data on a disk array will be deleted when the disk array is deleted.
Exception for RAID 1
When a RAID 1 array is deleted, the data on both hard disks is
retained as two normal hard disks.
► Select Delete RAID Disk Drive using the arrow keys and press the Enter key.
► Use the space bar to select the RAID to be deleted and confirm by pressing the
You will be prompted to confirm that the RAID should be deleted.
► Confirm with the
The RAID will be deleted.
10600854936, edition 1
Y key.
BIOS Setup Utility
key.
Del
English - 13