Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
This function is for programming the Start/Stop timing. Up to 3 different Start/Stop ti-
mings can be configured. The setting is as follows:
Step 1: Select the programme to be configured:
Press
twice to select programme 1.
Press
three times to select programme 2.
Press
four times to select programme 3.
Step 2: Press
to programme the start time.
Step 3: Adjust the hours with the buttons
Step 4: Press
to select the minutes.
Step 5: Adjust the minutes with the buttons
Step 6: Press
to programme the stop time.
Step 7: Adjust the hours with the buttons
Step 8: Press
to select the minutes.
Step 9: Adjust the minutes with the buttons
Step 10: Press
to validate the programme.
Step 11: Press
to return to the main screen.
The display automatically returns to the main screen after 10 seconds.
Refer to the following section to activate the programme:
Step 1
Step 2
Step 5
Step 6
Step 9
Step 10
Swimming pool heat pump
and
.
and
.
and
.
and
.
Step 3
Step 7
Step 11
Programming Start/
Step 4
Step 8
Step 12
65
4.7
Stop of timer
GB
Quicklinks ausblenden:
Werbung
Kapitel
Inhaltsverzeichnis
Fehlerbehebung
