8 Leonard
CONTROL PANEL
Sensor fields / Buttons
Display
A
B
BEFORE FIRST USE
WARNING! Refer to Safety
chapters.
Before first use
The oven can emit an odour and smoke during preheating. Make sure that the room is
ventilated.
Step 1
Set the clock
1.
,
- press to set the
time. After approximate‐
ly 5 sec., the flashing
stops and the display
shows the time.
Turn off the oven and wait until it is cold. Place the accessories and the removable shelf sup‐
To set the time.
To set a clock function.
To set the time.
A. Clock functions
B. Timer
Step 2
Clean the oven
1. Remove all accessories
and removable shelf
supports from the oven.
2. Clean the oven and the
accessories with a soft
cloth, warm water and a
mild detergent.
ports in the oven.
Step 3
Preheat the empty oven
1. Set the maximum tem‐
perature for the function:
.
Time: 1 h.
2. Set the maximum tem‐
perature for the function:
.
Time: 15 min.