Leonard LBC1414X Benutzerinformation Seite 21

Everyday
Use
Accessories
How to remove: Shelf supports /
catalytic panels
Remove the shelf supports / catalytic
panels to clean the oven.
Step 1 Turn off the oven and wait un‐
til it is cold.
Step 2 Pull the front of the shelf sup‐
port away from the side wall.
Hold the rear of the shelf sup‐
port and catalytic panel in
place. The catalytic panels
are not attached to the oven
walls. They can fall out when
you remove the shelf sup‐
ports.
Step 3 Pull the rear end of the shelf
support away from the side
wall and remove it.
Step 4 Install the shelf supports in
the opposite sequence.
How to use: Catalytic cleaning
There are catalytic panels in the cavity. It
absorbs fat during catalysis.
Clean the cavity after each use. Fat accumulation or other residue may
cause fire.
Moisture can condense in the oven or on the door glass panels. To decrease
the condensation, let the oven work for 10 minutes before cooking. Do not
store the food in the oven for longer than 20 minutes. Dry the cavity with a
soft cloth after each use.
Clean all accessories after each use and let them dry. Use a soft cloth with
warm water and a mild detergent. Do not clean the accessories in a dish‐
washer.
Do not clean the non-stick accessories using abrasive cleaner or sharp-
edged objects.
1
Spots or discolouration of the catalytic
coating have no effect on the cleaning.
Leonard 21
2