Periodical Maintenance Checks - RCM Brava 1000 ET Handbuch Für Gebrauch Und Wartung

38
Routine control and maintenance operations
1) The motor-sweeper must be inspected by a skilled technician who checks its safety or for any damage or defects in the
following cases:
 before it is put into operation;
 after modifications or repairs;
 at regular intervals, as indicated in the "Routine maintenance and control operations" table.
2) Every six months check that the safety devices are in good working order; the inspection must be made by authorized
specialist staff.
To ensure that the safety devices are operating properly, the machine must be overhauled by specialist staff every 5 years..
3) The person in charge of the machine must make an annual check on its condition. During this check, he must decide
whether the motor-sweeper still complies with the technical safety regulations, and then apply a marker plate to the
machine to indicate that the check has been made.
Periodical maintenance
checks
1 Check belts
2 Check that the main brush is free fom wires, strings, etc.
3 Check dust filter
4 Replace dust filter
5 Check main and side brushes trace width
6 Check the battery liquid
7 Check motor brushes
and safety checks
Intervals in hours
8 40 150






500 1500
