Operation - CONDTROL HYDRO PRO Bedienungsanleitung

WOOD AND CONCRETE
EN
MOISTURE METER
Keyboard
Button Short press
Switch on the device/data hold on
the display
Select the material
Select the group number of the
material/flip through measurement
results in memory / select menu item
Zero calibration/ parameter setting
in menu/clear the memory
Memory
Select the sensor

OPERATION

Install/charge the batteries
Install the batteries in the battery compartment observing correct polarity. Use
nickel metal hydride batteries. The battery level is shown on the display.
Charge batteries when symbol
Use USB charger delivered in the set (5V, 0.5 A). It takes approximately 4 hours to
fully charge the batteries.
Switch on/off
Switch on: short press
Switch off: press and hold
8 8
HYDRO PRO CONDTROL
Long press
Averaged measurement
Menu
Switch off the device
appears on the display,
during 1 sec.
User manual