Cleaning And Maintenance; Troubleshooting - cecotec Mambo 8590 Bedienungsanleitung

6. CLEANING AND MAINTENANCE

The stainless-steel jar is dishwasher safe.
Fig.25
Warning: Assemble the part as shown below, only when the stainless-steel jar is washed in
the dishwasher.
Clean the food processor after each use.
Turn off and unplug the appliance from the power supply and allow it to cool down before
cleaning it.
Wash the butterfly whisk and the rest of the accessories with warm soapy water. Rinse and
dry thoroughly.
Wipe the main body with a clean damp cloth. If food residue remains, dampen the cloth in
warm soapy water before wiping it. Never immerse the main body in water or other liquid.
In order to maintain the good performance of your appliance, check and clean the removable
bottom part of the jar after each use. Wipe it with a soft damp cloth and dry it thoroughly
before using it again.
If the appliance is not going to be used for a long time, unplug it from the power supply and
store it in a cool and safe place.
The blades and the MamboMix spoon are dishwasher safe.

7. TROUBLESHOOTING

Error Description
code
E1 Lock system fault
E2 Temperature
sensor error
E3 The motor is
blocked.
Possible cause
The jar or the jar's lid are not
fi ed properly.
The jar is not in its correct
position or connection of the
temperature sensor at the jar
base is damaged.
There is too much food inside
the jar.
ENGLISH
Solution
Re-assemble the jar and jar
lid, make sure all the parts
are assembled properly and
tightly and try operating it
again.
Re-assemble the jar and make
sure it is fi ed properly.
Remove some food from
inside the jar or cut the food to
smaller pieces and restart the
machine.
50