Call Options - Panasonic KX-TG9120EX Bedienungsanleitung

TG9120_40_50EX(e).book Page 34 Monday, August 7, 2006 3:52 PM
L
Base Unit Settings
Ringer setup
Ringer volume
1
J (centre of joystick) i L i L
2
"Ringer Setup" i L
3
"Ringer Volume" i L
4
Push the joystick up or down to select
the desired volume. i L i {ih}
Night mode
Night mode allows you to select a block of
time during which the base unit will not ring
for outside calls. This feature is useful for
times when you do not want to be disturbed,
for example, while sleeping. Night mode can
be set independently for the handset (page
29) and the base unit.
Set the date and time beforehand (page 15).
Setting the start and end time for night
mode
1
J (centre of joystick) i L i
L
2
"Ringer Setup" i L
3
"Night Mode" i L
4
"Start/End" i L
5
Enter the desired hour and minute you
wish to start this feature.
6
Enter the desired hour and minute you
wish to end this feature.
7
L i {ih}
Turning night mode on/off
1
J (centre of joystick) i L i
L
2
"Ringer Setup" i L
3
"Night Mode" i L
4
"On/Off" i L
34
5
"On" or "Off" i L i {ih}
Setting the ring delay for night mode
This setting allows the base unit to ring
during night mode if the caller waits long
enough. After the selected amount of time
passes, the base unit will ring. If you select
"No Ringing", the base unit will never ring
during night mode.
1
J (centre of joystick) i L i
L
2
"Ringer Setup" i L
3
"Night Mode" i L
4
"Ring Delay" i L
5
Select the desired setting. i L i
{ih}
Note:
L When the answering system answers the
call, this feature does not work.

Call options

Changing the recall time
Change the recall time, if necessary,
depending on the requirements of your
service provider/telephone company or
PBX.
1
J (centre of joystick) i L i L
2
"Call Options" i L
3
"Recall/Flash" i L
4
Select the desired setting. i L i
{ih}