Declaration Of Conformity; Cleaning Notes; Disposal Notes; Scope Of Delivery - Blaupunkt Concept Pro II Bedienungs- Und Einbauanleitung

Safety notes | Cleaning notes | Disposal notes | Scope of delivery | Placing the device in operation

Declaration of conformity

The Blaupunkt Embedded Systems GmbH de-
clares that the car sound system Birmingham
2012 complies with the basic requirements and
the other relevant regulations of the directive
2004/108/EC.
The declaration of conformity can be found on the
Internet under www.blaupunkt.com.

Cleaning notes

Solvents, cleaning and scouring agents as well as
dashboard spray and plastics care product may
contain ingredients that will damage the surface
of the car sound system.
Use only a dry or slightly moistened cloth for
cleaning the car sound system.

Disposal notes

Do not dispose of your old unit in the house-
hold trash!
Use the return and collection systems available to
dispose of the old device.

Scope of delivery

The scope of delivery includes:
1 Car sound system
1 Operating/installation instructions
1 Support frame
2 Disassembly tools
Optional equipment
(not part of the scope of delivery)
Use only accessories approved by Blaupunkt.
Information is available from your Blaupunkt
specialised dealer or on the Internet under
www.blaupunkt.com.
22

Placing the device in operation

Code protection

This car sound system is protected against theft
with a four-digit code number. You can specify
that the code number must be entered after every
interruption of the power supply from the vehicle
battery. With activated code query and without
this code number, the car sound system is useless
to a thief.
Notes:
• The code query is set to inactive at the
factory, but it can be activated (see the
chapter "User settings", section "Making
settings in the "VARIOUS" menu", menu
item "SEC CODE").
• The default setting of the code number is
"0000". The code number can be changed
(see the chapter "User settings", section
"Making settings in the "VARIOUS" menu",
menu item "CODE SET").
Entering the code number after a voltage
interruption
If the code query is activated, the four-digit code
number must be re-entered every time the device
is disconnected from the vehicle system voltage
(e.g. removal of the battery for repairs).
For each digit of the code number:
u Press the
/ button
digit.
u Press the
button
Note:
When entering the code, you may return to a
previous digit by pressing the
After setting and confi rming the fourth digit, the
car sound system is switched on.
Note:
If you enter an incorrect code number, "CODE
ERR" is briefl y displayed and the device is
blocked for 99 seconds. Afterwards you can
retry the entry.
7
to set the current
7
to confi rm.
7
button .