H.a.c.c.p Alarms - CombiSteel Blastchillers Gebrauchsanweisung

H.A.C.C.P ALARMS:

You can view the HACCP alarm events directly in the device's display. The following alarms are stored:
HA, maximum temperature alarm
PFA, extended power outage
OCF, exceeded maximum cycle time
To view the alarm of group press and hold SET key. The display will show the last alarm event. To view the alarm
press SET key.
To exit from the event, press the key SET.
With the keys you can select, if present, the other alarms events of the group.
To exit from an alarm group, keep the SET key pressed for 3 seconds.
IMPORTANT WARNING:
THE DIGITAL PARAMETER SETTING HAS BEEN PROGRAMMED FOR THE UNIT TO PERFORM THE BEST WAY. DO
NOT CHANGE ANY OF THE PARAMETER SETTING OTHER THEN SIMPLY SETTING THE TEMPERATURE. TO
CHANGE THE PARAMETERS SETTINGS CAN CAUSE SERIOUS PERFORMANCE DECRESAES AND CREATE SERIOUS
PROBLEMS IN THE UNIT.
PLUG IN THE PRODUCT. YOU WILL SEE HOLD ALARM ON DISPLAY. (ONLY ON THREE-PHASE 380 V UNITS). YOU
CAN START THE FREEZING/CHILLING OPERATIONS IN 45 MINUTES.
8
www.combisteel.com