To Edit Holding Temperature; Temperature Displaying; Checking And Changing The Control Set - CombiSteel Blastchillers Gebrauchsanweisung

TO EDIT HOLDING TEMPERATURE:

Within 5 seconds keep pressed until HdS flashes. Use arrows to edit the value. To confirm press
the again.

TEMPERATURE DISPLAYING:

Upper display: thermostat probe.
Lower display: needle probe.
By pressing the button the needle probe (ip3) is displayed. By pressing the arrow key, the time remaining
of the operation is displayed.

CHECKING AND CHANGING THE CONTROL SET:

By pressing the key in sequence:
rsI: thermostat set
phase end set for the probe
return to the normal display
5
www.combisteel.com