Led Indication - Motorola DLR-Serie Handbuch

Chapter 4
Troubleshooting
Observe the color of the LED when troubleshooting.
Table 6: Charger LED Indicator
Status
Power On
Charging
Charged
2
Error
3
Standby
Battery Level Status
The followings are troubleshooting procedure if there are no LED indication.
1 Check that the radio or stand-alone battery is inserted correctly.
2 Ensure the power supply is plugged into an appropriate AC outlet. This is applicable to Single-Unit
Charger (SUC) Tray only.
3 Ensure the cable is plugged securely into the charger socket. This is applicable to Single-Unit
Charger (SUC) Tray only.
4 Ensure the power cord is plugged securely into the charger socket with an appropriate AC outlet
and there is power to the outlet. This is applicable to 12 Pocket Multi-Unit Charger Tray only.
5 Confirm that the battery used with the radio is Motorola Solutions authorized batteries listed in
Motorola Solutions Authorized Batteries on page
2
Normally, re-positioning the battery pack corrects this issue
3
Battery temperature is warm, cold, or wrong power voltage is being used.
LED Status
Green for approxi-
mately one second
Steady red
Steady green
Red fast flash
Amber slow flash
Flash red 1 time
Flash amber 2 times
Flash green 3 times

LED Indication

7.
MN007800A01-AA
Troubleshooting
Comments
Battery low
Battery medium
Battery high
15