Installing Hardware - Braun CyberView X5 Handbuch

INSTALLING SOFTWARE AND DRIVER
for Mac (OSX) User
Before Installing the scanner driver...
If you choose to use the provided application for image editing, install the
application software (ex: Adobe® Photoshop® Elements) by inserting the
application CD into the computer's CD/DVD drive. Follow the instructions that
will be displayed in a window that opens automatically. If you have the iPhoto
application (or other photo editing software) installed on your Mac, you can skip
this step.
Installing Scanner Driver
a. Insert driver CD into the computer CD/DVD drive and look at the contents
with "Finder".
b. Double click the "CyberView " icon to begin the installation process.
Follow the onscreen prompts to complete the installation process.
NOTE:
c. Restart the computer once the installation process is complete.

INSTALLING HARDWARE

for PC (Windows) and Mac (OSX) Users
Connect the scanner to a power source:
1. Plug the AC adapter into an AC power source FIRST before plugging it
2. Attach the USB cable to the computer using the standard USB adapter
3. Switch on the power on the front side of the scanner.
For instructions on loading fi lm into holders continue on p. 11.
If you are familiar with loading fi lm into fi lm holders skip to p. 18.
8
8
Make sure the scanner is NOT connected to the computer during the
CyberView driver installation.
into the scanner.
end. Attach the USB adapter end of the cable to back panel of the
scanner.