Step 3 - Optional Prescan; Step 4 - Set Scan Settings - Braun CyberView X5 Handbuch

STEP 3 – Optional Prescan
Pre-Scanning should be used to manually adjust color/edit settings before doing
a fi nal scan.
1. In the CyberView interface click on the "Prescan" menu bar icon.
The scanner will initialize the prescanning process.
2. Once the prescan is complete, the image will appear in the CyberView
interface:
3. When the image appears on the screen, select the "Final scan icon" to scan
the fi le into a folder on the hard drive.
STEP 4 – Set Scan Settings
1. After clicking on the "Scan" from the menu, then click on Prefernce select
the fi lm type "Scan setting" setup dialog box will appear:
18 20
3a. Editing of the prescanned image before saving can also be done
by clicking on the "Image Adjustment" icon,
(for more see "Advanced scanning options" Page 23).