Braun CyberView X5 Handbuch Seite 31

There are three major parts of the CyberView user interface:
3. Curves and Levels
I. Menu Commands
Adjust image settings by moving Curve and Levels settings.
II. Function Bar Diagram / Toolbar Diagram
Comparison between before and after adjustment is displayed for
III. Active Frame Settings Area
reference.
I. Menu Commands [Overview]
Menu Commands - Scan
a. Prescan
b. Scan
c. Revert
d. Preference
e. Exit / Quit
Menu Commands - Preview
Example:
When the previewed image appears to be too dark, adjustments with the Input
slider in the Curves and Levels window can be made to correct the image. Selecting the Gray
slider in the center and moving it to the left will result in changes in the "After" view resulting
in a lighter image. Once the adjusted image is acceptble select "OK" to send changes to
the scanning hardware. The same method can also be used to adjust each color channel
independently, using the channel drop down menu "RGB = All colors" R = Red, G = Green,
and B = Blue.
32
[Overview + Full]
(overview)
(overview)
Zoom, Rotate & Flip features.
27
31