Troubleshooting - Electrolux LXB2AF82S Benutzerinformation

7.4 Cleaning the air channels
1. Remove the plinth (A), then the
ventilation grid (B).
2. Clean the ventilation grid. (Refer to
"Cleaning the ventilation filter". )
3. Carefully pull the air deflector out (C),
checking that there is no water left
from the defrosting.
4. Clean the lower part of the appliance
with a vacuum cleaner.
7.5 Cleaning the ventilation
filter
The filter can be removed for washing.
The appliance is equipped with an air
inlet filter (1) and an air outlet duct (2) on
the ventilation grid.

8. TROUBLESHOOTING

WARNING!
Refer to Safety chapters.
8.1 What to do if...
Problem
The appliance does not
operate.
C B A
Possible cause
The appliance is switched
off.
The mains plug is not con‐
nected to the mains socket
correctly.
1. Pinch flaps (A) and (B) with fingers.
2. Pull the filter down.
3. Pull the filter out.
4. To replace the filter reverse the
process.
7.6 Period of non-operation
When the appliance is not in use for long
period, take the following precautions:
1. Disconnect the appliance from
electricity supply.
2. Remove all food.
3. Clean the appliance and all
accessories.
4. Leave the door open to prevent
unpleasant smells.
Solution
Switch on the appliance.
Connect the mains plug to
the mains socket correctly.
ENGLISH 11
2
A B
1