Herunterladen Inhalt Inhalt Diese Seite drucken

Starting Up Cmx2 Ethernetport; Operation Modes Cmx2 Ethernetport; Possible Operation Errors Cmx2 Ethernetport - Connex CMx2-RX Bedienungsanleitung

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

Starting up CMx2 EthernetPort

When all connections are fixed properly, the "Status" LEDs for
power, TX and RX beside the fiber port lights in the following
color:
Green, steady shining – signal path of the Ethernet module
available, mains voltage available
WENN NICHT ANDERS DEFINIERT:
BEMASSUNGEN SIND IN MILLIMETER
OBERFLÄCHENBESCHAFFENHEIT:
TOLERANZEN:
LINEAR:
WINKEL:
GEZEICHNET
GEPRÜFT
GENEHMIGT
PRODUKTION
QUALITÄT
Operating Modes CMx2 EthernetPort
The electrical connection can be set to automatic mode, or
forced to 10 Mbit if necessary.
Furthermore, you can set an automatic or manual crossover
of the electrical connections (the setting for the manual
crossover is partly necessary with old networks)

Possible Operation Errors CMx2 EthernetPort

Error
Possible reasons
LEDs are off
The devices do not get any
power
TX-/ RX-LED is off
1.) The module detects an
open fiber connection
2.) The fiber optic cable is too
long, or has increased attenua-
tion values
LEDs on the Ethernet
The corresponding port gets
are off
no signal
All LEDs are shining as
The ports have been swapped
described but there is
at the receiver and transmitter
no signal
Instruction Manual CMx2 Media Converter
CMx2-DisplayPort
Beside the Ethernet sockets also the "Status" LED Speed lights
up in the following color:
In addition to the Ethernet sockets, the "Status" LED activity
lights up in the following color:
OBERFLÄCHENGÜTE:
ENTGRATEN
ZEICHNUNG NICHT SKALIEREN
ÄNDERUNG
UND SCHARFE
KANTEN
BRECHEN
NAME
SIGNATUR
DATUM
BENENNUNG:
CMx2-HIN12-EB2M-RX
18270049_01
WERKSTOFF:
ZEICHNUNGSNR.
A3
GEWICHT:
MASSSTAB:5:1
BLATT 1 VON 1
Debugging
Check the correct function of the mains voltage
1.) Check if the fiber optic cable is plugged in
2.) Check the proper function of the fiber optic
cable
Check the Ethernet connection of the
corresponding port
Check whether Port1 is coupled to Port1 and
Port2 to Port2
CMx2-HDMI
Media Converter
Green, pattern flashing 3x - 1Gbit transmission
Green, pattern Flashing 2x - 100 Mbit transmission
Green, pattern flashing 1x - 10 Mbit transmission
Yellow, flashing - signal transmission
WENN NICHT ANDERS DEFINIERT:
OBERFLÄCHENGÜTE:
BEMASSUNGEN SIND IN MILLIMETER
OBERFLÄCHENBESCHAFFENHEIT:
TOLERANZEN:
LINEAR:
WINKEL:
NAME
SIGNATUR
GEZEICHNET
GEPRÜFT
GENEHMIGT
PRODUKTION
QUALITÄT
WENN NICHT ANDERS DEFINIERT:
BEMASSUNGEN SIND IN MILLIMETER
OBERFLÄCHENBESCHAFFENHEIT:
TOLERANZEN:
LINEAR:
WINKEL:
NAME
GEZEICHNET
GEPRÜFT
GENEHMIGT
PRODUKTION
QUALITÄT
ENTGRATEN
ZEICHNUNG NICHT SKALIEREN
ÄNDERUNG
UND SCHARFE
KANTEN
BRECHEN
DATUM
BENENNUNG:
CMx2-HIN12-EB2M-RX
WERKSTOFF:
18270049_01
ZEICHNUNGSNR.
A3
GEWICHT:
MASSSTAB:5:1
BLATT 1 VON 1
OBERFLÄCHENGÜTE:
ENTGRATEN
ZEICHNUNG NICHT SKALIEREN
UND SCHARFE
ÄNDERUNG
KANTEN
BRECHEN
SIGNATUR
DATUM
BENENNUNG:
CMx2-HIN12-EB2M-RX
WERKSTOFF:
18270049_01
ZEICHNUNGSNR.
A3
Notes
GEWICHT:
MASSSTAB:5:1
BLATT 1 VON 1
page: 9

Werbung

Kapitel

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

Cmx2-tx

Inhaltsverzeichnis