Disc Operations - JVC kd-avx20 Bedienungsanleitung

Disc operations

The disc type is automatically detected, and playback starts automatically (for some discs: automatic start depends
on its internal program).
If a disc does not have any disc menu, all tracks in it will be played repeatedly until you change the source or eject the
disc.
If " " appears on the monitor, the unit cannot accept the operation you have tried to do.
• In some cases, without showing " ," operations will not be accepted.
Label side
When playing back a multi-channel encoded disc, the multi-channel signals are downmixed.
• You can fully enjoy multi-channel sound by connecting an amplifier or a decoder compatible with these
multi-channel sources. (☞ also page 66)
0:
Ejects the disc.
3/8:
Starts and pauses playback.
BAND: Stops playback.
~
Open the front panel.
Ÿ
Insert the disc.
Playback starts automatically.
Caution:
Do not place your finger behind the control
panel.
Caution on volume setting:
Discs and connected USB devices produce
very little noise compared with other sources.
Lower the volume before playing a disc to
avoid damaging the speakers by the sudden
increase of the output level.
18