Klarstein Remy Brillant Edition Handbuch Seite 27

1
Place the hood in pairs near the ceiling
hole. A third person must insert the plug
into the previously installed socket.
3
Mount the cover plate together with
the switch and cables to the LED lamps
in pairs and fasten it again with the 6
screws.
2
Slide the hood into the ceiling hole. Then
adjust the 4 screws at the bottom of the
hood evenly so that all 4 claws grip
firmly into the ceiling frame, so that the
hood is firmly seated on the ceiling and
no side is loose.
4
Attach the filter and close the cover plate.
Switch on the cooker hood using the
remote control.
EN
27