Installation, Handling And Initial Operation; Scope Of Delivery; Technical Data; Spare Parts And Accessories - egger EL 1 Betriebsanleitung

Installation, Handling and Initial Operation

3
3.1

Scope of delivery

Please check whether the delivery is complete and whether all parts are free from transport
damage. Immediately inform us or the distributor about missing parts or transport damage.
The UV-curing unit egger EL 1 consists of:
1 light protection cover
1 mains cable
1 metal plate for lacquering operations
1 operating instructions and processing manual
and can be put into operation right away.
3.2 Technical data of the light-curing unit egger EL 1
Power supply:
Mains frequency:
Connection:
Power input:
3.3 Spare parts and accessories for the light-curing unit egger EL 1
UVA-light tube
Blue-light tube
Rectangle socket
Light protection cover
Set of reflecting foils
Plastic plate transparent
Timer
3.4

Assembling and connecting the unit

The electrical light-curing unit egger EL 1 corresponds to the state-of-the-art standards and to
the acknowledged safety regulations, nevertheless dangers can arise. Please observe the fol-
lowing, before putting the unit into operation:
Qualified and trained persons must use the device only.

 Please adhere to the safety regulations accepted.
 Use the unit when in perfect and clean condition only and observe the operating in-
structions.
 Position the device horizontally and place it in its suitable working position.
 Remove the protection foils and the light protection cover off the workbench.
 Protect the unit against impact.
 Check, whether the unit is dry.
 Check whether the device is in technically perfect condition, especially the mains
cable!
 Plug in mains cable.
Betriebsanleitung/Operating Manual EL 1 REF 51100/51120V03-2014-12
230 V +/- 10% (or 115 V)
AC 50 Hz/60 Hz
mains plug Schuko (German)
AC 250 VA
REF 50103
REF 50104
REF 50107
REF 51102
REF 51104
REF 51103
REF 51109
Seite / Page 17 von / of 24