Features - Kicker KEYLOC Benutzerhandbuch

Features

The KEYLOC is a 2-channel DSP based active line
output converter with the following features.
Automatic Turn-on: DC offset remote input turn-on,
and remote output turn-on (100mA) to turn on other
products.
Frequency Response Correction: Smooths
frequency response of two channels from your
source unit via EQ correction. It can fix EQs with Qs
ranging from 0.5-10 with up to +/- of 12dB of boost
or cut.
Factory Time Delay Defeat: Ranging from .06mS
– 10mS, the algorithm is accurate down to .06mS.
ALL-Pass Filter Defeat: The KEYLOC can correct
up to three all-pass filters on one channel. The
All-pass filters can have a Q ranging from 0.5–3.5,
as long as they do not interact with the other All-Pass
filter's phase.
Passive Frequency Detection: Before running the
KEYLOC setup process, it is in passive frequency
detection mode. You can use this mode to detect
what band of frequencies are available on the given
speaker outputs that the KEYLOC is connected to.
Input Level: The speaker inputs are capable of
receiving either HI or LO level signals from your
source unit. When using a HI-Level signal, simply
press the Input Level switch on the amplifier to HI.
English 5