Herunterladen Inhalt Inhalt Diese Seite drucken

Bluetooth Function - DKN technology AiRun-C V2 Handbuch

Inhaltsverzeichnis

Werbung

After choosing the workout, set time using the DIAL KNOB.
Time setting range is 5:00-99:00 min.
Press START to begin exercising.
When the program is fi nished an alarm will sound and the
treadmill will slow to a complete stop.
Heart Rate Control (HRC) Programs
The AiRun-C v2 features a Bluetooth
rate receiver. To perform the HRC programs you need to
wear a compatible wireless heart rate chest strap. The com-
puter detects your heart rate from the strap and will control
the speed of the treadmill according to the maximum and
minimum stated Target Heart Rate.
Setting Up a Target Heart Rate (THR) Zone
When the treadmill is in standby mode, press PATTERN
and select HRC1 or HRC2. The window will display 30:00
minutes and fl ash.
HRC1 is limited up to 10 kph.
HRC2 is limited up to 12 kph.
Use the DIAL to adjust the time.
Press PROGRAM and the window will display the low
Target Heart Rate.
Use the DIAL to set the low Target Heart Rate.
Press PROGRAM again and the window will now display
the high Target Heart Rate.
Use the DIAL to set the high Target Heart Rate.
Press the START button to begin your workout.
The fi rst two minutes of the HRC program are a warm up
stage. During this stage, the machine will not adjust the
speed automatically.
After warm-up, the treadmill will calculate the diff erence
between target heart rate and user heart rate and adjust the
program accordingly.
During the workout, the speed will be controlled automatically
by the treadmill to keep you working out at the set heart rate.
You can override settings by using the DIAL KNOB.
Speed increases every 45 seconds until target heart rate is
reached (10 kph for HRC1 or 12 kph for HRC2) .
In case the THR is exceeded, the computer will automatically
reduce speed until THR is reached again.
After the total exercise time elapsed, the treadmill will slow
down and stop.

BLUETOOTH FUNCTION

Check the DKN-Technology website for more information
about which apps the AiRun-C v2 is compatible with.
Turn on Bluetooth function on your tablet or smartphone to
connect it with the machine (pairing is not required).
Download the app, open it on your device and follow the
steps to set it up.
®
Smart wireless heart
Press START to start the treadmill and begin your workout. If
you turn the Bluetooth off or if signal is lost, the treadmill will
slow down and the console will display all functions as zero.
HEART RATE DISPLAYED IS A RANDOM INDICATION
AND MAY BE INACCURATE, AND CANNOT BE USED
AS GUIDANCE IN ANY CARDIO-VASCULAR RELATED
MEDICAL OR PARAMEDICAL PROGRAM.
IF YOU EXPERIENCE DIZZINESS,NAUSEA, CHEST
PAIN, OR ANY OTHER ABNORMAL SYMPTOMS STOP
EXERCISING IMMEDIATELY AND CONSULT A PHYSI-
CIAN WITHOUT DELAY.
THE OWNER'S MANUAL IS FOR CUSTOMERS' REFE-
RENCE ONLY. THE SUPPLIER CANNOT GUARANTEE
FOR MISTAKES OCCURRING DUE TO TRANSLATION
OR CHANGES IN TECHNICAL SPECIFICATIONS OF
THE PRODUCT.
WARNING: BEFORE BEGINNING USING THIS
MACHINE OR DOING ANY EXERCISE PRO-
GRAM,CONSULT YOUR DOCTOR. THIS IS ESPECIAL-
LY IMPORTANT FOR PEOPLE OVER THE AGE OF 35
OR THOSE WITH PRE-EXISTING HEALTH PROBLEMS.
THE SUPPLIER ASSUMES NO RESPONSIBILITY FOR
PERSONAL INJURY OR PROPERTY, AND/OR DAMAGE
SUSTAINED BY OR THROUGH THE USE OF THIS
PRODUCT.

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis