Teaching The User; Adjustment Options / Features - Thomashilfen Swifty Gebrauchsanweisung

Instructions for Use – Swifty

Teaching the User

The user is taught how to use this device by trained staff who will reference these Instructions for Use.

Adjustment Options / Features

The settings / adjustments must always be made by trained / instructed professionals (such as medical product consult-
ants of specialist medical dealers).
Folding
Note: Be careful not to drop the rehab stroller onto the floor during folding to avoid bending and damaging the frame.
Make sure the plastic plug of the folding mechanism is in the correct position (higher end of the plug is pointing to the
rear of the rehab stroller). (Fig. 4)
Caution: The rehab stroller must not be folded up while the sun and rain cover is mounted.
Folding open
Hold the buggy on the top and on the side using the push bar and pull it upwards with a swinging movement (the lock-
ing slide audibly engages). Loosen the clamping lever at the back and adjust the desired back angle (see the section on
backrest adjustment). (Fig. 5) Adjust the height-adjustable push bar to the desired position by pressing the side pushbut-
tons (Fig. 6).
Folding closed (smallest folded size)
Loosen the clamping lever at the back. Pull up the locking slides on the push bar (right and left). (Fig. 4) and hold onto
the safety bow mounted on the right-hand side. Using your upper body, push the push bar forward and fold the buggy
closed in a forward direction (Fig. 7). Press the backrest downwards and tighten the clamping lever again. Fold down
the push bar on the backrest. (Fig. 5) Fold down the push bar on the backrest.
Parking brake function
To lock the brake, place your foot on the brake bow and push it down. Release the brake by placing your foot under the
brake bow and pulling it upwards. (Fig. 8)
Locking function for the front wheels
Tightening: Turn the front wheel so that it is straight and let the locking latch bolt snap in (it clicks audibly).
Releasing: Pull out the locking latch bolt and lock it with a 90° rotation. (Fig. 9)
Backrest adjustment
Loosen the clamping lever on the back, adjust the desired hip angle by sliding the back bow on the back rail, and re-
tighten the lever. (Fig. 5)
Seat depth
Loosen the two star grips beneath the seat and pull out the seat section towards you. The seat upholstery does not need
to be removed to adjust the seat depth. Once you have made the adjustment re-tighten the star grips. (Fig. 15)
Tip: To make setting the seat depth easier, grasp the front edge of the seat surface with one hand while pressing your
other hand against the bottom centre of the backrest. (Fig. 11)
Lower leg length
Unscrew the Allen keys (3 mm) on the right and left rear of the footrest tube guides. Move the footrest to the desired
position by sliding it on the frame tube and tighten the screws again. (Fig. 12)
26
2021-04