Set Rinsing Times - Vision Aqua Verdanium Home Gebrauchsanleitung

Set rinsing times

You can set the rinsing times under Rinsing Programs (Spülprogramme), except for the rinsing times of the
IB-Programm. They are set at the factory and cannot be changed. If you are in the operating mode menu,
use the (+) or (-) key to select the Rinsing Programs (Spülprogramme) program and confirm the selection
with the OK-Key.
BETRIEBSART
Button
mit "+" / "-" Taste
auswählen
After you have selected the rinsing programs with the
time of the permeate rinsing. The rinsing time is shown at the top left of the display. Press the
to select the time.
Permeatspülen
Auswahl Spülzeit
Button
ESC ← → OK
The time will now flash and can be changed between 15 and 300 seconds with the (+) or (-) key. Less than 15
seconds is not available to protect the system from possible damage. Confirm the selection with the OK-Key.
If the (+) key is pressed once more, you can change the membrane rinsing time (Membranspülen Auswahl
Spülzeit). Press the OK-Key once now to set the membrane rinsing time manually. The rinsing time is located
at the top left of the display. Press the OK-Key once to select the time.
Membranspülen
Auswahl Spülzeit
Button
ESC ← → OK
The time will now flash and can be changed between 15 and 300 seconds with the (+) or (-) key. Less than 15
seconds is not available to protect the system from possible damage. Confirm the selection then with the
OK-Key.
60 Instruction Manual – Verdanium Home – Ver. 2.2.1 – 04.2021
SPÜLPROGRAMME
ESC ← → OK
OK key, you can choose and manually set the rinsing
OK-Key once
00015 Sek
Permeatspülen
Spülzeit Permeat
ESC ← → OK
00015 Sek
Membranspülen
Spülzeit Membrane
ESC ← → OK
If the (+) - key is pressed once more, you can change the rinse duration (Nachspülen Auswahl Spülzeit). Now
press the OK key once to set the time of the rinse manually. The rinsing time is located at the top left of the
display. Press the OK key once to select the time.
Nachspülen
Auswahl Spülzeit
Button
ESC ← → OK
The time will now flash and be changed between 15 and 300 seconds with the (+) or (-) key. Less than 15
seconds are not available to protect the system from possible damage. Then confirm the selection with the
OK key.
Press the ESC key to exit the program again and return to the operating mode menu.
If the (+) key is pressed a second time after rinsing, you can perform permeate rinsing (Permeatspülung).
The following message appears on display:
Permeatspülung
durchführen
Button
ESC ← → OK
As soon as the selection is confirmed with the OK
to return to the operating mode menu. As soon as the flushing is finished, the system automatically returns
to the operating mode menu.
If the (+) key is pressed a second time, you can perform a membrane rinse (Membranspülung). The display
then shows the following message:
Membranspülung
durchführen
Button
ESC ← → OK
If you select membrane rinsing (Membranspülung durchführen) with the
membrane. Press the ESC key to return to the operating mode menu. As soon as the rinsing is finished, the
system automatically returns to the operating mode menu.
Instruction Manual – Verdanium Home – Ver. 2.2.1 – 04.2021
Set rinsing times
00015 Sek
Nachspülen
Spülzeit Permeat
ESC ← → OK
Permeat spülen
ESC ← 060%
key, the system flushes the permeate. Press the ESC key
Membran spülen
ESC ← 090%
OK key, the system rinses the
61