Electrical Connection; Sample Installation - Vision Aqua Verdanium Home Gebrauchsanleitung

Electrical connection

The Verdanium Home is equipped with an IEC socket, which has an integrated fuse and a power switch.
A Power cord with a length of approx. 1.8 m is supplied with the Verdanium Home.
The electrical plug must always be easily accessible to unplug the Verdanium Home from
the electrical grid.
Only connect the Verdanium Home to an electrical system complying with VEM
0100 standard.
The unit label on the upper rear part of the housing provides information about the nominal power input
and the corresponding fuse.
The information provided on the label must be compatible with the electrical grid.
•
Connect the Verdanium Home with the supplied power cable to the electrical grid.
•
When the power switch ( I ) is turned on, the Verdanium Home starts and waits for the initial
commissioning to begin.
50 Instruction Manual – Verdanium Home – Ver. 2.2.1 – 04.2021
1. Verdanium Home
2. Hydro-Stopper mounted to the angle valve
3. Angle valve cold water connection
4. 3/8" tube water supply
5. 1/4" tube wastewater
6. 1/4" tube ultra-pure water
7. Withdrawal tap
1.
3.
4.
Instruction Manual – Verdanium Home – Ver. 2.2.1 – 04.2021

Sample installation

7.
6.
2.
5.
The maximum cable length for a 1/4" tube is 6 m.
The maximum cable length for a 3/8" tube is 8 m.
51