Selecting Preset Sound Modes; Storing Your Own Sound Adjustments - JVC ks-fx742r Bedienungsanleitung

Selecting preset sound modes

You can select a preset sound adjustment
suitable to the music genre.
Select the sound mode you want.
Each time you press the button,
the sound mode changes as
follows:
SCM OFF BEAT
Ex.: When you select "BEAT"
Indication For:
SCM OFF (Flat sound)
BEAT Rock or
disco music
SOFT Quiet
background
music
POP Light music
Notes:
• You can adjust each sound mode to your preference,
and store it in memory.
If you want to adjust and store your original sound
mode, see "Storing your own sound adjustments"
below.
• To adjust the bass and treble reinforcement levels or
to turn on/off the loudness function, see page 20.
Storing your own sound
adjustments
You can adjust the sound modes (BEAT, SOFT,
POP) to your preference and store your own
adjustments in memory.
• There is a time limit in doing the following
procedure. If the setting is canceled before you
finish, start from step 1 again.
SOFT POP
Preset values
BAS TRE LOUD
00 00 OFF
+02 00 ON
+01 –03 OFF
+04 +01 OFF
1
Call up the sound mode you want to
adjust.
• See left column for details.
2
Select "BAS" (bass), "TRE" (treble),
or "LOUD" (loudness).
3
Adjust the bass or treble level or
turn the loudness function ON/OFF.
• See page 20 for details.
Equalization pattern changes as you
adjust the bass or treble.
Ex.: When you adjust "TRE" (treble)
4
Repeat steps 2 and 3 to adjust the
other items.
5
Press and hold SCM until the sound
mode you have selected in step 1
flashes on the display.
Your adjustment made for
the selected sound mode is
stored in memory.
6
Repeat the same procedure to store
other sound modes.
To reset to the factory settings, repeat the
same procedure and reassign the preset values
listed in the table on the left column.
21