Dienste, Verbindungen, I/O-Daten - Belden Hirschmann OCTOPUS HiOS-2A Referenzhandbuch

Industrieprotokolle
16.3 EtherNet/IP
Tab. 63:
Id Attribute
0x7 Last Active Node
on Port 2
0x8 Ring Protocol
Participants Count
0x9 Ring protocol
participants list
0xA Active Supervisor
Address
0xB Active Supervisor
Precedence
0xC Capability Flags
1. Die bedingten Attribute sind für Geräte implementiert, die in der Lage sind, in einem Ring zu funktionieren.

Dienste, Verbindungen, I/O-Daten

Das Gerät unterstützt die folgenden Verbindungstypen und Parameter.
Tab. 64:
Setting
Comm Format:
IP Address
Input Assembly
Instance
Input Size
Output Assembly
Instance
Output Size
Configuration Assembly
Instance
Data Size
386
Class-Attribute (Forts.)
Access
Rule
1
Get
1
Get
1
Get
Get
1
Get
Get
Einstellungen für die Integration eines neuen Moduls
I/O connection
Data - DINT
IP address of the
device
100
32
150
32
151
10
Data type
STRUCT of:
UDINT DeviceIp
ARRAY of:
6 USINT Mac
UINT
ARRAY of:
STRUCT of:
UDINT DeviceIp
ARRAY of:
6 USINT Mac
STRUCT of:
UDINT SupervisorIp
ARRAY of:
6 USINT
SupervisorMac
USINT
DWORD
Input only
Data - DINT
IP address of the
device
100
32
152
0
151
10
Description
Last Active node at the end of chain
through port 2 of active ring
supervisor during ring fault
Number of devices in ring protocol
participants list
List of devices participating in ring
protocol
IP and/or MAC address of the
active ring supervisor
Precedence value of the active ring
supervisor
Describes the DLR capabilities of
the device
Listen only
Input Data - DINT -
Run/Program
IP address of the
device
100
32
153
0
151
10
UM Config OCTOPUS
Release 8.6 12/2020