THOMSON WHP6207 Bedienungsanleitung Seite 5

4. Getting Started
• The headset is equipped with a rechargeable
battery. The battery must be fully charged before
using the device for the first time.
• Ensure that the headset is switched off before
charging it.
• Begin charging the power pack by connecting
the included USB charging cable to the charging
terminal (6) as well as to the USB connection of
a PC/laptop.
• Alternatively, you can charge the headset using a
suitable USB charger. Please refer to the operating
instructions for the USB charger used.
• The function LED is constantly lit red during
charging.
• It takes around 3 hours until the battery is com-
pletely charged.
• Once the charging process is complete, the
indicator LED goes out.
• Disconnect all cable and mains connections after use.
5. Operation
5.1 Bluetooth pairing
Note – Pairing
• Make sure that your Bluetooth-capable terminal
device is on and Bluetooth is activated.
• Make sure that your Bluetooth-capable terminal
device is visible for other Bluetooth devices.
• For more information, please refer to the
operating instructions of your terminal device.
• The headset and the terminal device should be
no further than 1 metre apart. The shorter the
distance, the better.
• Make sure that the headset is fully charged and
switched off.
• Press and hold the multifunction button (3)
for about 4 seconds to turn the headset on. It
automatically enters pairing mode. The function
LED flashes blue in a quick rhythm. The headset is
searching for a Bluetooth connection.
All manuals and user guides at all-guides.com
• Open the Bluetooth settings on your terminal
• Select "WHP6207" and wait until the headset is
• You can now use the headset.
5.2. Automatic Bluetooth connection (after
successful pairing)
• Make sure that the headset is switched on.
• Press and hold the multifunction button (3) for
• You can now use the headset.
device and wait until "WHP6207" appears in the
list of Bluetooth devices found.
listed as connected in the Bluetooth settings on
your terminal device.
Note – Bluetooth password
Some terminal devices require a password in
order to connect to another Bluetooth device.
• If your terminal device requests a password for
connection to the headset, enter 0000.
Note
• If pairing is successful, a beep will sound and
the LED indicator is constantly lit blue.
• If pairing is not successful, the indicator remains
constantly lit, and you will have to perform
pairing again.
• If pairing takes longer than 90 seconds, the
headset switches off automatically.
• If this happens, you will need to switch the
headset off and on again if you want to pair it
with your terminal device again.
• On some terminal devices, such as PCs, you will
need to select the headset from the pairing list
after pairing and confirm you wish to 'use as
audio device'.
about 2 seconds to automatically connect the
headset to your terminal device.
3