Adjust Device Position - Z-EDGE T4 Bedienungsanleitung

c. This position should be close to the cigarette lighter (power) in the car to
ensure charging whilst recording.
3. Having found a suitable location on your windshield, peel off the protective
plastic backing from the suction-cup.
4. Press the suction-cup firmly against your windshield, and rotate the lever
clockwise (12 o'clock) to secure.
5. For a more organized car environment, the mini USB cable can be routed as
indicated by the dashed line in the diagram (See 2.4).
WARNING:
• Do not install the device on a tinted window - doing so may damage the
tint film.
• Ensure the dash camera is orientated correctly before installing.

2.3 Adjust Device Position

1. Loosen the nut to swivel the device vertically. Click into place and secure by
tightening the nut.
2. Swivel the device horizontally for a clear view.
-5-