Belden HIRSCHMANN MSP40 Referenzhandbuch Seite 1121

Industrieprotokolle
16.3 EtherNet/IP
Tab. 73:
Id Attribute
0x6 Cable Test Result
6
Ethernet-Verbindungsobjekt
Legen Sie mindestens eine Instanz für das Gerät fest, zum Beispiel Instanz 1 als Instanz des CPU-
Ethernet-Interfaces (Class Code 0xF6) von EtherNet/IP.
Tab. 74:
Id Attribute
0x1 Interface Speed
446
Hirschmann-Erweiterungen des TCP/IP-Interface-Objekts (Forts.)
Access
Rule
Get
Instanz-Attribute
Access
Rule
Get
Data type
STRUCT of:
USINT Interface
USINT CablePair
USINT CableStatus
USINT
CableMinLength
USINT
CableMaxLength
USINTCableFailureL
ocation
Data type Description
UDINT Used interface speed in MBit/s (10,
100, 1000, ...).
0 is used when the speed has not
been determined or is invalid because
of detected errors.
Description
100BASE:{
{Interface, CablePair1,
CableStatus, CableMinLength,
CableMaxLength,
CableFailureLocation}
{Interface, CablePair2,
CableStatus, CableMinLength,
CableMaxLength,
CableFailureLocation}
}
1000BASE:{
{Interface, CablePair1,
CableStatus, CableMinLength,
CableMaxLength,
CableFailureLocation}
{Interface, CablePair2,
CableStatus, CableMinLength,
CableMaxLength,
CableFailureLocation}
{Interface, CablePair3,
CableStatus, CableMinLength,
CableMaxLength,
CableFailureLocation}
{Interface, CablePair4,
CableStatus, CableMinLength,
CableMaxLength,
CableFailureLocation}
}
UM Config MSP40
Release 8.6 12/2020