Bluetooth Interface; Activation; Design-2 / Design-3 - Assa Abloy eCLIQ Connect Anleitung

Bluetooth interface

Activation

The eCLIQ Connect key has a switch (position sensor or push-button)
®
which can be used to switch on the wireless interface as needed.
This offers the following advantages:
∙ As a wireless key, the Bluetooth key is usually not visible for the envi-
ronment and
∙ energy consumption is significantly reduced.

Design-2 / Design-3

Design-2 Design-3
key with position sensor key with push-button
Design-2 - Position sensor
The wireless interface of the key is activated via a position sensor.
Design-3 – Push-button
The wireless interface of the key is activated via a push-button.
EN
22 Bluetooth interface