TAG Heuer EI2444 Anleitung Und Garantie Seite 4

2
INSTRUCTIONS AND GUARANTEE
PART I SAFETY AND HANDLING INFORMATION
PART II INTERNATIONAL LIMITED GUARANTEE
PART III REGULATORY INFORMATION
PART IV TAG HEUER CONTACT POINTS AND
CUSTOMER SERVICE CENTERS
PART I: SAFETY AND HANDLING INFORMATION
Caution! Before you begin to use the TAG Heuer Connected
Watch, please read the following instructions which contain
important safety and regulatory information. Please keep
these instructions in a safe place so that you can refer to
them when needed.
I. Safety and handling instructions
A. Main characteristics of your TAG Heuer Connected
Watch
The TAG Heuer Connected Watch is a luxury watch which includes
Wi-Fi, Bluetooth, global positioning system (GPS), near frequency
communications (NFC) functions and a heart rate sensor. Ambient
light sensor and inter-modularity (i.e. users can change parts of the
Watch such as the strap by means of buying extra accessories) are
also available in this version of the Connected Watch.
It is not intended to be used as a medical device.
The TAG Heuer Connected Watch runs Wear OS by Google. Wear
OS by Google is a trademark of Google LLC. Wear OS by Google
works with phones running Android 6.0+ (excluding Go edition)
or iOS 10.0+. Supported features may vary between platforms
and countries. Visit g.co/wearcheck on your phone or a computer
to see if it is compatible.
The TAG Heuer Connected Watch requires the use of the charging
accessories provided with it. The accessories provided with your
TAG Heuer Connected Watch contain a USB cable, a charging
cradle and a wall plug. You will find below further details on the
use of the Watch and its charging accessories.
Performance and handling
For optimal performance of the heart rate sensor, your watch and
strap must be snugly fitted to the wrist. If you want to measure
your heart rate while practicing sports, wearing your watch with
a steel bracelet may not be an optimal choice, as it can be difficult
to tighten properly.
2 To disable the watch's radio (Bluetooth, Wi-Fi, Location (GPS) and
NFC) functions, please follow the following stages:
7
• If your screen is dim, touch the screen to wake up the watch;
12 • Swipe down from the top of the screen;
• Touch the Settings symbol ( );
13
• Scroll down and touch Connectivity
• Touch Bluetooth, Wi-Fi, NFC or Location (GPS) settings depend-
ing on which you want to turn off/on;
• If Wi-Fi or Bluetooth is set to Automatic, touch the little icon
listed next to either Wi-Fi or Bluetooth to turn it off or disable.
B. Important safety precautions
Please note that failure to comply with the following guidelines
may cause malfunctions or be hazardous to the user and/or
exclude or reduce the benefit from the International Limited
Guarantee.
1. Using the TAG Heuer Connected Watch and its accesso-
ries safely
a. Keeping your TAG Heuer Connected Watch safe
(i) General
Do not use or store the TAG Heuer Connected Watch and its ac-
cessories in dusty, dirty areas as its components may be damaged.
Do not store the TAG Heuer Connected Watch and its accessories
in warm areas. High temperatures can shorten the life of electronic
devices, damage batteries and warp or melt certain plastics.
Do not store the TAG Heuer Connected Watch and its accessories
in cold areas. When the TAG Heuer Connected Watch afterwards
warms up to its normal temperature, moisture can form inside
the TAG Heuer Connected Watch, which may damage the elec-
tronic circuits.
Do not attempt to open the watch's casing. Non-expert handling
of the TAG Heuer Connected Watch may cause damages to your
TAG Heuer Connected Watch and will void the International
Limited Guarantee.
Do not drop or knock the TAG Heuer Connected Watch. Do not
place heavy objects on it.
Do not use sharp objects on the screen. Do not use excessive force
on the screen. Rough handling may damage the internal circuits.
Do not use harsh chemicals, cleaning solvents or strong deter-
gents to clean the TAG Heuer Connected Watch.
While listening to your device with headphones, make sure