Music Streaming; Listening To Music From An Audio Device; Adjusting The Volume Level; Operating An Audio Device With This Unit - Sony MEX-BT3900 Bedienungsanleitung

Music streaming

Listening to music from an audio
device
You can listen to music of an audio device on this
unit if the audio device supports A2DP
(Advanced Audio Distribution Profile) of
Bluetooth technology.
1
Turn down the volume on this unit.
2
Press (SOURCE/OFF) repeatedly until
"BT AUDIO" appears.
3
Operate the audio device to start
playback.
4
Adjust the volume on this unit.

Adjusting the volume level

The volume level is adjustable for any difference
between the unit and the Bluetooth audio device.
1 Start playback of the Bluetooth audio device at
a moderate volume.
2 Set your usual listening volume on the unit.
3 Press the select button.
4 Rotate the control dial until "BTA VOL"
appears, and rotate the volume control dial to
adjust the input level ("+18dB" – "0dB" –
"– 8dB").
Operating an audio device with this
unit
You can perform the following operations on this
unit if the audio device supports AVRCP (Audio
Video Remote Control Profile) of Bluetooth
technology. (The operation differs depending on
the audio device.)
To Do this
Press (1) (REP)*
Repeat play
Press (2) (SHUF)*
Shuffle play
Press (3)/(4) (ALBUM –/+)
Skip albums
[press once for each album]
Press (6) (PAUSE)*
Play
unit.
Press (6) (PAUSE)*
Pause
unit.
Skip tracks Press SEEK –/+ (
[press once for each track]
Reverse/ Press and hold SEEK –/+
Fast-forward ( . / >
point]
1
1
2 on this
2 on this
/ )
. >
) [hold to desired
*1 Press repeatedly until the desired setting appears.
*2 Depending on the device, it may be necessary to
press twice.
Operations other than the above should be
performed on the audio device.
Notes
• Depending on the audio device, information, such as
title, track number/time, playback status, etc., may
not be displayed on this unit. The information is
displayed during Bluetooth Audio playback only.
• Even if the source is changed on this unit, playback
of the audio device does not stop.
Tip
You can connect a cellular phone that supports A2DP
(Advanced Audio Distribution Profile) as an audio
device and listen to music.

Initializing Bluetooth Settings

You can initialize all the Bluetooth-related
settings from this unit.
1
Press and hold (SOURCE/OFF) for 1
second to turn off the power.
2
Press and hold the select button.
The menu list appears.
3
Rotate the control dial to select "BT
INIT," then press it.
The confirmation appears.
4
Rotate the control dial to select "INIT-
YES," then press it.
"INITIAL" flashes while initializing the
Bluetooth settings.
"COMPLETE" appears when initializing has
finished.
Note
When disposing of this unit, preset numbers should be
deleted with "BT INIT."
27