Using Menu Options - Atag CM4411AC Anleitung

MAINTENANCE

Using menu options

EN 24
The menu options are used to change and save the appliance's factory
settings, start programs and look up information.
They are:
• Language (see "Setting the language" on page 24)
• Water hardness (see "Water hardness" on page 24)
• Temperature (see "Setting the coffee temperature" on page 25)
• Auto shut off time (see "Setting the switch-off time" on page 26)
• Coffee program (see "Changing the quantity of coffee" on page 13)
• Cappuccino program (see "Setting the cappuccino program" on
page 20)
• Hot water (see "Preparing hot water" on page 16)
• Descale (see "Carrying out the descaling program" on page 26)
• Rinsing (see "Rinsing" on page 28)
• Statistics (see "Statistics" on page 28)
• Reset to default (see "Resetting the appliance to factory settings" on
page 28)
If you don't press OK after you change a setting, the appliance
automatically returns to the coffee mode after 120 seconds without
saving the entries.
To go back to the coffee mode, press the MENU button twice.
Setting the language
You can choose between several languages. A different language can
be selected as follows:
1. Press the MENU button and press the scrolling buttons < or > until
the menu option CHOOSE LANGUAGE appears. Confi rm the menu
option with the OK button.
2. The language set appears on the display. Press the scrolling
buttons < or > until the desired language appears. When the desired
language is displayed, confi rm with the OK button.
Water hardness
A PLEASE DESCALE! message is displayed after the appliance has
been operated for a factory set period of time, calculated on the basis
of the maximum quantity of lime scale which may be contained in the
water used. If necessary, this period of operation can be extended,