Information On Data Protection; Declaration Of Conformity; Sabbatical Mode - Bosch KAD-Serie Montage- Und Gebrauchsanleitung

en
3. Press the + button.
An animation is shown in the refrigerator
compartment display.
The update will be installed.
All buttons are locked during the installation.
If the installation has been completed
■
successfully, "On" is shown in the refrigerator
compartment display.
If the installation has not been completed
■
successfully, "Er" is shown in the refrigerator
compartment display.
Restart the update later on.
If the installation cannot be completed after
multiple attempts, notify Customer Service.

Information on data protection

When your Home Connect refrigerator is connected for
the first time to a WLAN network that is connected to
the Internet, your appliance transmits the following
categories of data to the Home Connect server (initial
registration):
Unique appliance identification (consisting of
■
appliance codes as well as the MAC address of the
installed Wi-Fi communication module).
Security certificate of the Wi-Fi communication
■
module (to ensure a secure IT connection).
The current software and hardware version of your
■
domestic appliance.
Status of any previous resetting to factory settings.
■
This initial registration prepares the Home Connect
functions for use and is required only when you want to
use Home Connect for the first time.
Note
Note that the Home Connect functions can be used
only in conjunction with the Home Connect app.
Information on data protection can be accessed in the
Home Connect app.

Declaration of conformity

Robert Bosch Hausgeräte GmbH hereby declares that
the appliance which features Home Connect
functionality is in accordance with the basic
requirements and the other relevant provisions of the
directive 1999/5/EC.
A detailed R&TTE Declaration of Conformity can be
found online at www.bosch-home.com among the
additional documents on the product page for your
appliance.
46

Sabbatical mode

Sabbatical mode settings:
Accoustic signal is switched off.
■
Super cooling or super freezing is then ended
■
(if activated).
The light is switched off.
■
The light on the display panel is reduced to basic
■
lighting.
Buttons are locked (except "options" button and
■
setting button +).
Switching sabbatical mode on and off
1. To activate, simultaneously press the "options"
button and setting button + for 5 seconds. [sabbath]
is redisplayed on the display panel.
2. To deactivate, simultaneously press the "options"
button and setting button + for 5 seconds.