Structure And Function; Operation - GEHA Home & Office X10 CD Style Anleitung

INSTALLING SHREDDER
1. The centre of gravity is located at the top part of the device. Make sure to position
the file shredder on an even surface to prevent it from tipping over.
2. Never operate the device near sources of heat or cold, or in an overheated, moist
or dusty environment.
3. Place the device close to a socket and ensure easy access to the socket, in case
the device needs to be unplugged.
4. First insert the inner container (for CDs/DVDs) into the paper bin.
5. Place the document shredder on the paper bin. Ensure that it is stable. Take care
not to pinch your fingers between the upper edge of the bin and the cutting unit.
6. Plug the device into the socket and make sure that the working voltage complies
with the supplying voltage.
IMPORTANT:
The document shredder can only be placed on the bin in one direction. Ensure that the shred-
der is properly positioned on the paper bin.

STRUCTURE AND FUNCTION

1. 3-Position slide switch for AUTO, OFF and REVERSE
2. Power indicator
3. CD/DVD feeder slot
4. Paper / credit card feeder slot
5. Semi-transparent bin
6. Handle
7. Main black bin

OPERATION

The sliding switch (AUTO/OFF/REV) on the machine has the following functions.
AUTO position: the machine is ready for operation, shredding starts as soon as paper, CD/DVD
or credit card is inserted in the feeder slot.
OFF position: the machine is switched off.
REV position: paper can be reversed.
1.
Set the slide switch to „AUTO", when the machine is on standby; put the shredding paper
vertically into the feeder slot; the machine will start automatically and shred the paper; it
automatically returns to standby after finishing the shredding process.
Basket install instructions
1. Put the two parts of the basket together, make the hole on the
transparent bin match the tongue on the bottom of the black bin
2. First, lock one side of the two-part bin with the link, pay attention
that the link is installed in the right direction according to the
indicated arrow, and keep
the link parallel to the edge of basket until it reaches the bottom and
is locked tight.
3. Then lock the other side of the two-part bin in the same way
GB
9