-
Ensure that the correct voltage is used.
-
Never use several extension cords.
-
In case the device displays any unusual characteristics (e.g. strange smell or smoke),
immediately stop operating the device and remove the mains power plug from the wall
socket.
sETTING UP ThE fILE shrEDDEr
1. The centre of gravity is located in the top part of the device. Make sure to position the file
shredder on an even surface to prevent it from toppling over.
2. Never operate the device near sources of heat or cold, or in an overheated, moist or dusty
environment.
3. Place the device close to a wall socket and ensure easy access to the wall socket, in case
the device needs to be deactivated.
4. Make sure that the waste paper container is pushed all the way into the device.
5. Connect the mains power plug to a regular 220-240 V AC wall socket.
sTrUcTUrE aND fUNcTIoN
1 Paper/CD, credit card slot
2 LCD display
3 ON/ OFF - switch
4 Button for forward operation/ time + (FWD)
5 Button for reversed operation/ time - (REV)
6 Button for setting the time
7 Display 'Basket Full'
8 Display 'Overheat'
9 Display 'Basket missing'
10 Display 'Power'
11 Viewing window
12 Waste paper container
13 Rollers
11