Inhaltsverzeichnis
Werbung
¡
Machine installation should only be carried out
by a qualified technician.
¡
Contact your Brother dealer or a qualified elec-
trician for any electrical work that may need to
be done.
¡
The sewing machine weighs more than 33 kg.
The installation should be carried out by two
or more people.
¡
Do not connect the power cord until installation
is complete, otherwise the machine may oper-
ate if the treadle is pressed by mistake, which
could result in injury.
¡
Be sure to connect the ground. If the ground
connection is not secure, you run a high risk of
receiving a serious electric shock, and problems
with correct operation may also occur.
¡
This sewing machine should only be used by
operators who have received the necessary
training in safe use beforehand.
¡
The sewing machine should not be used for
any applications other than sewing.
¡
Turn off the power switch at the following
times, otherwise the machine may operate if
the treadle is pressed by mistake, which could
result in injury.
¡
When threading the needle
¡
When replacing the needle and bobbin
¡
When not using the machine and when leav-
ing the machine unattended
* When using a clutch motor, the motor will
keep turning even after the power is
switched off as a result of the motor's iner-
tia. Wait until the motor stops fully before
starting work.
¡
Attach all safety devices before using the sew-
ing machine. If the machine is used without
these devices attached, injury may result.
¡
Turn off the power switch before carrying out
cleaning, otherwise the machine may operate
if the treadle is pressed by mistake, which could
result in injury.
* When using a clutch motor, the motor will
keep turning even after the power is
switched off as a result of the motor's iner-
tia. Wait until the motor stops fully before
starting work.
CAUTION
Installation
¡
All cords should be secured at least 25 mm
away from any moving parts. Furthermore, do
not excessively bend the cords or secure them
too firmly with staples, otherwise there is the
danger that fire or electric shocks could occur.
¡
Install the belt covers to the machine head and
motor.
¡
If using a work table which has casters, the
casters should be secured in such a way so that
they cannot move.
¡
Be sure to wear protective goggles and gloves
when handling the lubricating oil, so that no oil
gets into your eyes or onto your skin, otherwise
inflammation can result.
Furthermore, do not drink the oil under any cir-
cumstances, as it can cause vomiting and di-
arrhoea.
Keep the oil out of the reach of children.
Sewing
¡
If using a work table which has casters, the
casters should be secured in such a way so that
they cannot move.
¡
Do not touch any of the moving parts or press
any objects against the machine while sewing,
as this may result in personal injury or damage
to the machine.
¡
For machines with automatic presser lifter, do
not touch the solenoid section, otherwise burns
may result.
¡
If an error occurs in machine, or if abnormal
noises or smells are noticed, immediately turn
off the power switch. Then contact your near-
est Brother dealer or a qualified technician.
¡
If the machine develops a problem, contact
your nearest Brother dealer or a qualified tech-
nician.
Cleaning
¡
Be sure to wear protective goggles and gloves
when handling the lubricating oil, so that no oil
gets into your eyes or onto your skin, otherwise
inflammation can result.
Furthermore, do not drink the oil under any
circumstances, as it can cause vomiting and
diarrhoea.
Keep the oil out of the reach of children.
DB2-B720 series (English)
ii
Werbung
Inhaltsverzeichnis
