Before First Use; Initial Cleaning - Electrolux FHH6886-GK Benutzerinformation

BEFORE FIRST USE

WARNING!
Refer to "Safety information" chap-
ter.

INITIAL CLEANING

• Remove all accessories and removable
shelf supports (if applicable).
• Clean the appliance before first use.
Refer to the chapter "Care and
cleaning".
SETTING THE TIME
You must set the time before you
operate the oven.
When you connect the appliance to the
electrical supply or after a power cut, the
indicator for the Time of Day function flash-
es.
Press the + or - button to set the correct
time.
After approximately five seconds, the flash-
ing stops and the display shows the time of
day you set.
To change the time, press
again and again until the indicator
for the Time of Day function flash-
es. You must not set the Duration
time.
PREHEATING
Preheat the empty appliance to burn off the
remaining grease.
1.
Set the function
temperature.
2.
Let the appliance operate for one hour.
or End function at the same
and the maximum
3.
Set the function
temperature.
4. Let the appliance operate for ten mi-
nutes.
5.
Set the function
temperature.
6. Let the appliance operate for ten mi-
nutes.
Accessories can become hotter than usual-
ly. The appliance can emit an odour and
smoke. This is normal. Make sure that the
airflow is sufficient.
ENGLISH 7
and the maximum
and the maximum