Installation - Electrolux FHH6886-GK Benutzerinformation

30 www.electrolux.com

INSTALLATION

WARNING!
Refer to "Safety information" chap-
ter.
TECHNICAL DATA
Height
Width
Depth
Oven capacity
LOCATION OF THE APPLIANCE
You can install your freestanding appliance
with cabinets on one or two sides and in
the corner.
Minimum distances
Dimen-
sion
A
B
LEVELLING
Use small feet on the bottom of appliance
to set the appliance top surface level with
other surfaces.
Dimensions
847 - 867 mm
596 mm
600 mm
74 l
B
A
A
mm
2
685
ANTI-TILT PROTECTION
CAUTION!
You must install the anti-tilt protec-
tion. If you do not install it, the ap-
pliance can tilt.
Make sure you install the anti-tilt
protection at the correct height.
1. Set the correct height and area for the
appliance before you attach the anti-tilt
protection.
2. Install the anti-tilt protection 77 mm
down from the top surface of the appli-
ance and 49 mm from the left side of
the appliance into the circular hole on a
bracket (see fig.). Screw it into the solid
material or use applicable reinforce-
ment (wall).
3. You can find the hole on the left side
on the back of the appliance (see fig.).
Lift the front of the appliance (1) and
put it in the middle of the space be-
tween the cupboards (2). If the space
between the bench cupboards is larger
than the width of the appliance, you
must adjust the side measurement to
centre the appliance.
Make sure that the surface behind the
appliance is smooth.