Connecting External Equipment - Toshiba REGZA XF355 Serie Bedienungsanleitung

Connecting external equipment

Before connecting any external equipment, turn off all main power switches. If there is no switch
remove the mains plug from the wall socket.
SCART 2 (EXT2)
SCART 1 (EXT1)
decoder*
media recorder
Aerial cables: - - - - - - - - - - - -
Connect the aerial to the socket on the rear of the television.
If you use a decoder* and/or a media recorder it is essential
that the aerial cable is connected through the decoder and/
or through the media recorder to the television.
SCART leads: . . . . . . . . . . . . . . . . .
Connect the video recorder IN/OUT socket to the television.
Connect the decoder TV socket to the television. Connect the
media recorder SAT socket to the decoder MEDIA REC.
socket.
Before running Auto tuning put your decoder and media
recorder to Standby.
The phono sockets alongside the COMPONENT VIDEO
INPUT sockets will accept L and R audio signals.
The Digital Audio Output socket enables the connection of
a suitable surround sound system. NOTE: this output is
always active.
HDMI™ (High-Definition Multimedia Interface) is for use
with a DVD, decoder or electrical equipment with digital
audio and video output.
COMPONENT VIDEO (EXT3)
MEDIA REC.
TV
IN/OUT SAT
FIXING STRAP
HDMI™ INPUT DIGITAL AUDIO
SOCKETS OUTPUT
(DTV MODE ONLY)
It is designed for best performance with 1080i and 1080p
high-definition video signals but will also accept and display
VGA, 480i, 480p, 576i, 576p and 720p signals.
PLEASE NOTE: Although this television is able to
connect to HDMI equipment it is possible that some
equipment may not operate correctly.
A wide variety of external equipment can be
connected to the back of the television, therefore
the relevant owners manuals for all additional
equipment must be referred to.
We recommend SCART 1 for a decoder and SCART 2 for
a media recorder. If connecting S-VIDEO equipment, set
the INPUT for EXT2. See page 36.
If the television automatically switches over to monitor
external equipment, return to normal television by
pressing the desired programme position button. To
recall external equipment, press
DTV, EXT1, EXT2, EXT3C, HDMI1, HDMI2, HDMI3,
PC or ATV.
HDMI, the HDMI logo, and High-Definition Multimedia Interface
are trademarks or registered trademarks of HDMI Licensing, LLC.
7
CABLE HOLDER
COMMON INTERFACE
The Common Interface is for a
Conditional Access Module (CAM).
Contact a service provider.
o
to select between