Hdmi Setting - Toshiba REGZA XF355 Serie Bedienungsanleitung

HDMI setting

HDMI setting menu consists of the following 3 items (Deep
Color, xvYCC, and Lip Sync). Some early HDMI equipment
may not work properly with your HDMI TV, please unplug
your HDMI cable first and then try setting the following three
options to Off. Adjusting these settings should allow your
early HDMI source to operate properly with your television.
NOTE: xvYCC in the HDMI setting menu is only for the
models ZF355 series..
a
In the SET UP menu press
is highlighted, then press OK.
b
b
Press to highlight HDMI setting and press OK.
AV connection
PC/HDMI1 audio
HDMI1 audio
HDMI setting
EXT1 output
EXT2 input
EXT2 output
Back
MENU EXIT
NOTE: The HDMI setting is grayed out on non-
HDMI inputs.
c
B b
Press or to select option, then press
select the settings.
HDMI setting
Deep Color
xvYCC
Lip Sync
Back
MENU EXIT
Input selection and
AV connections
b
until AV connection
PC
Digital
OK
DTV
AV
DTV
Watch TV
C c
or to
On
On
On
Watch TV
continued
• Deep Color: On
This feature allows to HDMI source to increase available
colors bits within the boundaries defined by the RGB or
YCbCr colour space.
• xvYCC: On
This feature expands the acceptable colour range (limits)
in the HDMI signals, then allows sending wider colour
signals from HDMI sources.
• Lip Sync: On
This option activates an auto audio/video display timing
adjustment function that allows HDMI source devices to
accurately perform synchronization automatically.
All above HDMI settings need proper HDMI source
device.
If HDMI source products does not support these features,
the television may not work properly by activating these
features.
NOTE: If your HDMI connection is capable of 1080p and/
or your television is capable of refresh rates greater than
60Hz or supports Deep Color, you will need a Category 2
cable. Conventional HDMI/DVI cables may not work
properly with this mode.
38